Glass Carboy with bottom spigot - Can/should it be done?

Question

Glass Carboy with bottom spigot - Can/should it be done?

Ryan Wade

2016年8月1日 19:27

My friends and I are just getting into homebrewing, and we've been throwing around some ideas to try to simplify things. One of those ideas is to use glass carboys with a bottom spigot in order to eliminate siphoning. We would either do this by getting custom carboys made by a glassmaker (we're thinking of something with a bottom that mirrors the top) or by modifying an existing carboy using glass-cutting tools.

I'm wondering if someone with more experience could chime in and lay out some of the pros and cons of this idea. We're looking for both logistical and monetary comments regarding this. Do you think it will be cost-prohibitive? Do you think we'll run into any issues we have not foreseen?

Topic siphon carboy fermentation homebrew

Category Mac

Greg · Accepted Answer · 2016年8月1日 19:27

Well, I see all of the above answers...but I have been using 15 gallon demijohns with a bottom Spigot for many years. I make wine. The demijohn is not good for the primary, but after the 1st or 2nd racking it works great. You do need to fill it (15 gallons). The newer models are very light...hey, I am 64 with a replaced shoulder and it is easy for me to deal with. Once its placed and full, well, its there until you empty it or get a couple of tough guys to move it. Good luck!

blah44 · Accepted Answer · 2013年12月27日 15:31

1

blah44 answered at 2013年12月27日 15:31

After years I decided I hated spigots anyway and replaced even my spigotted plastic buckets with solid versions. No leaks, no problems. Syphon for the win!

mpurkeypile · Accepted Answer · 2013年12月21日 03:13

Don't do that. There are kits out there that let you put the carboy upside down, with a spout out of the existing hole. They don't cost much and you're essentially making a poor man's conical fermenter (lacking some of the benefits though).

Denny Conn · Accepted Answer · 2013年9月23日 00:40

Well, here's my list of why it's a bad idea....

You will weaken the carboy and increase the risk of it breaking.
You need to be able to keep the spigot sanitized throughout fermentation.
Have you priced having custom carboys made?
It's just unnecessary...siphoning isn't that hard to do. What you're looking at is dangerous, expensive and unnecessary compared to just siphoning. If you really feel the need to use a valve for xfers rather than siphoning, use buckets with valves on them. You still have the sanitizing issue to deal with (hey, I've tried using fermenters with valves and they were more trouble than they're worth), but at least a bucket would be safe and inexpensive.

rickb · Accepted Answer · 2013年9月22日 17:22

I would advise trying to siphon first.

You can use one siphon on multiple carboys. This is a much more economical option to making or converting multiple glass secondary fermenters to have a spigot. Of course, thus assumes that you have more than one brew going at once. As you're new, this is mere conjecture. However, if you plan on being both wine and beer, you'll likely want more than one fermenting vessel.
Try cleaning and sanitizing a spigot when it's on your full carboy. It's easier and safer (for your brew at least) to sanitize a siphon.
The is a danger of installing or orienting your spigot such that the weight of the carboy will break it.
From personal experience, i have a hard time remembering to close the spigot after I have cleaned it, sanitized it and installed it back into my fermenter. This tends to waste wort into my kitchen floor.

Glass Carboy with bottom spigot - Can/should it be done?

About