Gross layer of foam at the end of fermentation and aging

I experienced few times a gross layer of foam when fermentation finishes. But the beer was fine, no symptoms of contamination neither off-flavors. I never measure the depth of foam but it can have about 2 to 3 cm (among 1 inch).

What can cause this ?

Is that explanation possible? : One of the explanations I found around the internet is that this foam is composed by dead yeasts, died by "hydration shock" when it is directly spread over the wort instead of pure water. This is strange to me, because although I use dry yeast spread directly over wort (at equivalent temperature), I think it would be necessary lots and lots of dead yeasts which isn't all of them within yeast packet. So, they would need to reproduce and dead yeasts don't reproduce, so the explanation about the "hydration shock" is very strange, which makes me think that if the foam is composed by dead yeasts the yeasts died after reproduction and not when spread over the wort.

Topic foam yeast-starters wort yeast fermentation homebrew

Category Mac

1
answered at

I get the same kraeusen when using liquid yeast - it's not from hydration shock. In fact, the dead yeast that don't survive hydration simply fall to the bottom of the fermentor.

The reason for the kraeusen is the constant churning of the wort during active fermentation, which mixes proteins, tannins and hop-alpha acids to create the structure for the krausen. As the krausen forms, it naturally collects yeast on top also, since the yeast become trapped in it.

The yeast are not necessarily dead, an during active fermentation are usually very much alive and highly viable. Brewers harvest yeast from the kraeusen - so-called top-cropping to obtain some very healthy and clean yeast from the fermenting beer. Once the yeast falls back to the bottom of the fermentor, it's mixed with dead yeast and trub, making it less than ideal.

About

Geeks Mental is a community that publishes articles and tutorials about Web, Android, Data Science, new techniques and Linux security.