How can I raise my mash pH with something other than chalk or baking soda?

Question

How can I raise my mash pH with something other than chalk or baking soda?

Hop the Mad Alchemist

2016年3月21日 21:53

I recently moved to Rhode Island and my mash efficiency has suffered. The main part of my process that has changed is the water. The pH as measured by colorpHast strips (and two other off brands) starts out around 5.5 (with the systematic error of 0.3 as observed by Braukaiser, that's 5.8).

This pH is ridiculously low to work with, and I've been having a hard time. I've used more calcium carbonate (chalk) and sodium bicarbonate (baking soda) than I like to raise the pH to acceptable levels in the mash (it gets to the 4-5 pH range even with a mash of around 14 SRM).

I've also taken to steeping roasted (and really any 100+ Lovibond grain) grains for pretty much every beer I mash to avoid dropping the pH with darker grains.

What else can I use to raise the pH?

I've heard sodium hydroxide (food grade) might be usable, but I have no experience with it and haven't found much about it with regard to mashing wort. It's also caustic and somewhat dangerous to handle from what I hear.

I've also heard that calcium hydroxide (used for pickling) is an option. I think I might order some of this from Amazon and try it out.

Topic mash-ph mash homebrew efficiency

Category Mac

Don · Accepted Answer · 2016年3月21日 21:53

Oyster shells work well if you boil them first to kill latent bacteria. Save the milky water and use that to raise the pH initially... then toss the shells in for residual alkalinity. Oyster shells add no flavor and drop out easily enough when you strain the mash.

Don · Accepted Answer · 2016年1月30日 02:25

1

Don answered at 2016年1月30日 02:25

I have read that crushed oyster shells work really well as a pH stabilizer.. Best when used at the beginning of a ferment to keep it from dropping to below 4.2 which would stall the fermentation in many cases.

Denny Conn · Accepted Answer · 2012年3月3日 16:19

1

Denny Conn answered at 2012年3月3日 16:19

I use pickling lime frequently to raise pH and it works really well. It's much more effective than either chalk or baking soda, which means you can use a lot less of it.

mdma · Accepted Answer · 2012年3月2日 16:33

Sodium hydroxide is lye - caustic soda, and has the same disadvantage as baking soda - leaving behind sodium anions, as well as being a strong base, so careful handling is required. Calcium hydroxide - pickling lye - is better suited, it's also a strong base and is used much in the food industry. (I live in Norway, and here it's used to prepare a fish meal eaten at Christmas.) I don't like that dish so I've not used it myself, but it's a powder that's fairly easy to handle. Weigh out half a gram, 1/8tsp and observe the change in pH, and add more as necessary. It produces Calcium anions - adding calcium is beneficial since all beers need at least 50ppm calcium.

If you prefer to avoid handling strong bases, Chalk is ok for the beer, since it avoids sodium, but doesn't readily dissolve. (Although with your acidic mash you might get better results than most.) A trick to getting it to dissolve is to emulate what mother nature does - constant motion (flowing waters) and dissolved CO2 (from the air) help dissolve the chalk into solution. You can speed up the natural process by adding the water and chalk to a corny keg, adding a little CO2 pressure and shaking/rocking.

HBT - Brewing with low alkalinity water

How can I raise my mash pH with something other than chalk or baking soda?

About