Should I let hydrated dry yeast cool before pitching

The Gospel of John states that dry yeast should be hydrated at a temperature warmer than what you would typically start fermentation. But John also states that yeast should be pitched from cold to warm, i.e. the yeast slurry should be colder than the cooled wort.

An example of ale yeast:

  • recommended rehydration temperature: 24°C
  • recommended fermentation temperature: 16-20°C (I want to start at 16°C)

So...

  • How do I hydrate my yeast at 24°C and then cool it to below 16°C without shocking the yeast?
  • Is it OK to let it cool down?
  • Over what time period (It should be pitched about 30min after hydration)?

Topic fermentation-temperature dry-yeast yeast homebrew

Category Mac

1
answered at

I think the jury is still out on whether or not you need to rehydrate your yeast at all. You can find people on both sides of the argument. For example here is an article detailing an experiment between rehydrated and dry sprinkled yeast. Personally, I don't like to rehydrate due to the extra work and potential for contamination, but that's just my own preference.

If you do decide to rehydrate, in general you want to have your yeast slurry close to your wort temperature. The way you can accomplish this is to slowly add a little bit of wort to your rehydrated yeast. Each time you add some wort, your yeast slurry will cool and get closer to the wort temperature. Once your yeast temperature is within a few degrees of your wort temperature, you can pitch it. This document from Lallemand explains a little more.

1
answered at

Once you finish you boil phase and cool your wort, depending on the material you use, it would be quite time consuming to go down to 16C especially if your room temperature is above that, Considering that,

  • I would say that you should pitch your yeast around 20-22C (temp after boil wort cooling) and then place your wort in your temperature controlled environnement (at 16C). That way you will not shock your yeast (a couple of degrees doesn't do much). Your fermentation will start after few hours and by that time your wort would be at desired temperature.

  • Cooling down your yeast could also be a solution, the only precaution is to do it slowly (not submerge your yeast in ice).

  • Concerning your point about pitching 30min after rehydratation, I would not do that. To ensure good fermentation, It is always recommended to make a yeast starter (from 0.5L to 2L depending on your needs) at least one day in advance. You can find good yeast starter calculators online and good technical documentation.

About

Geeks Mental is a community that publishes articles and tutorials about Web, Android, Data Science, new techniques and Linux security.