What does a good crush look like, and does it matter if grains are overcrushed if batch sparging?

I am looking for some advice on what a good crush looks like, and whether it matters on my system. The opinions and pics online are all over the place on this.

Background: I am buying small-batch all-grain kits at my LHBS, and the grains come pre-crushed. I am pretty new to all-grain. I batch sparge in a two-gallon cooler, using a paint strainer bag instead of a false bottom or bazooka screen. The crushed grains have mostly whole husks separated from the kernel, what seems like a lot of flour, and about an 80-20 mix of broken kernels to whole kernels.

Does the crush, especially having a high flour ratio) make a difference if I am batch sparging? I don't have to worry about stuck sparges, but my wort is very cloudy. My finished beer is hazy.

I am getting absorbtion of around 0.25 gal./lb., which is around double the 0.13 gal./lb. rate I saw on this forum. (I calculate absorbtion as: [water into mash tun] - [volume of two runnings into boil kettle]. My mash tun has negligible dead space, and I run everything out on the second runnings.) Could the crush explain my higher-than-predicted absorbtion rate?

If it matters in answering my question, my efficiency into the fermenter is around 62-63% on my system using this crushed grain, I don't test pH or my water, I use bottled water, my strike water to grain ratio is 1.5 qts/lb., and I then add my sparge water based on how much more wort I need by measuring first runnings.

Edit: Correction, I misread my notes on what I am collecting. My absorbtion loss is a hair over one quart per two lbs. of grain, so that is squarely in the .125 gal./lb. that the experts tell us to expect.

Topic batch-sparge crush sparge all-grain mash homebrew

Category Mac

1
answered at

A good crush should keep the grain husks intact, since they will then filter out the flour and provide an efficient lauter. I also crush reasonably finely, which does produce some flour, but as long as the husks are intact you're good. I have a 3 roller mill - the sales pitch was that it doesn't pulverize the husks as much as a 2 roller. I've not used a 2 roller, so can't comment on the difference, but I do see the husks clearly in the grist and get very clear wort after 90 mins of mash recirculation.

1
answered at

Clarity of wort has no bearing on the clarity of the finished beer. Beer clarity is much more dependent on things like proper pH and mash conversion an d a large amount of flour should have no effect. My crush is very fine with a large amount of flour and my efficiency ranges from 80-85%. Based on that, it's difficult to believe your wort loss is solely due to absorption. Is there any dead space in your mash tun that could account for it?

About

Geeks Mental is a community that publishes articles and tutorials about Web, Android, Data Science, new techniques and Linux security.