Too much sweetness and banana like aroma/taste

I've been brewing 6 batches of Ale and I've had problems with sweetness and banana like aroma and taste (esters probably). I think the problem is the fermentation temperature. My fermentation bucket sits in a room with a temperature ranging from 20 to 27 celsius (68-81 fahrenheit). The only brew that tasted "right" was a stout but the roasted barley might have just masked the sweetness. The sweetness is present after few days of fermentation and then gets stronger. I have used US-05, WY 1056 and WY 1272 yeasts.

I was thinking of making a fermentation chamber from a larger bucket (than the fermentation bucket) with insulation of the outside. The temperature would be controlled with adding cold water to the bucket and removing warm water. Do you think this would do the job? If I have understood correctly the first days of the fermentation are the most important temperature wise.

Something like this: https://dl.dropboxusercontent.com/u/3248030/beer/fermentation.png

Topic sweetness banana ale temperature fermentation homebrew

Category Mac

1
answered at

I agree with others; I think your fluctuating temperature is the likely cause. I have never tried the swamp method but I am about to convert a refrigerator into a fermentation chamber.

I have a temperature control unit I picked up on ebay from someone in Hong Kong - the unit name escapes me at the moment. I am going to by-pass the thermostat on the fridge and hook up the temperature control to activate the compressor when too warm and a low wattage light bulb, that I will fix to the bottom of the fridge, when too cool to provide heat.

I am hoping to source a second-hand fridge this week, so I might be able to get started on this at the weekend.

If you Google 'fridge fermentation chamber' you can find quite a few links to blogs and forums on this.

EDIT: I dug out the controller details. Here is a link to Amazon's US page, just for info. All-purpose Temperature Controller STC-1000 With sensor

1
answered at

Would placing the fermenter tank in a tub of water be a good way to handle hot environments?

I started brewing extracts a couple of months ago and I started to do the "swamp cooler" method which sounds similar to that which you have postulated. The only difference is that I never replace the water.

I would recommend using a outer bucket filled with water up to the level of the fermenting wort, and make sure the bucket has a large enough diameter so that you can add frozen water bottles to it. I do this every hour on hot days (like yesterday!).

Get a thermometer and measure the ambient temperature of the room the fermenting wort is, and then measure the water in the outer container, and note the difference. If the water is at 75*F, you may not have to add water bottles, although I do during the first 4 days of fermenting because supposedly the exothermic reaction adds 10*F, so I add enough frozen water bottles during that time to knock it down to 65*F.

Also, make sure the outer container is not to tall. Place a black t-shirt over the fermenting-bucket/carboy and then place a fan at the t-shirt (the shirt wicks up water, the fan evaporates the water, leaving you another 10-15*F to not worry about).

1
answered at

It's certainly possible that the banana esters are due to warm fermentation temperature.

After sanitation, I'd argue that the most important step in brewing is fermentation temperature. You want both the correct temperature for your yeast (each yeast varies so check the manufacturer), and a consistent temperature. The method you mentioned helps primarily with regulating temperature fluctuation, but it can be helpful in maintining the correct temperature, too, if you're diligent.

About

Geeks Mental is a community that publishes articles and tutorials about Web, Android, Data Science, new techniques and Linux security.